And so too is my line of jewellery, entitled Resist.
The ÿ neckpiece is the latest addition to the series, and yes, it is the type of welded steel chain one might normally use to doubly secure one’s trailer to the hitch at the back of the car. I got it at my local hardware store (Shout out to 5 Corners Hardware – yes, not to be confused with the 5 Spot – a diner also in Queen Anne, or 5 Point Cafe, just down the road in Belltown. If you’ve not visited Seattle, and Queen Anne especially, the crosswalk motif is ‘at least 5 lanes of traffic, awkwardly conjoined’ and is somehow considered a whimsical feature. Shout out to Sydney, AU, I know you know this scene…) a year or so ago when contemplating chains for my piece for Boris Bally’s gun show Imagine. This length has thus been hanging on the door to my basement studio for long enough to leave semi-circular marks as the chain frequently arced across the door, tethered by a single nail.
I was gradually sandblasting every scrap of steel chain I could come up with in my studio, and one day I was sitting at my enamel bench when I realised there was one I hadn’t tried. Cut to 20 minutes later, after hand sawning a sacrificial link *twice* in order to separate it from the rest of the length (the chain is just too thick to try and bend to get away with one cut alone), I was hugging the sandblaster in my usual fashion. Because zinc is a neurotoxin at just about the same temperature that enamel fires, it pays to assiduously remove all traces of galvanisation. Once blasted, I painted on a pretty swatch of my favourite blue of the day, fired, and viola! I had a beautiful chain, that read ‘ÿ’ in binary, because, well, ÿ are we in this mess…?
And in case you’re new, ÿ binary, or even, ÿ blue?
In the Resist system of binary/ascii* communication, the 0’s and 1’s of binary code are switched from numbers to colors, gray and blue respectively. By individually enameling each part of a piece in the correct sequence, I encode words like ‘no’ onto earrings, or ‘resist’ onto pins and neckpieces.
So why blue? Because that color is the opposite of orange on the traditional color wheel.
These little messages in jewellery form are each hand-made and hand-enamelled in stainless steel, with titanium rivets and ear hooks on the ‘Resist tile’ pieces. They are very reasonably priced, and in some sort of seasonal coincidence, all of my stores have just been resupplied! What [in]credible timing!
Please go check out these pretties ‘in the real’ in Australia at:
And if you’re around Seattle’s U district this coming Friday, Danaca Design is having its first ever Black Friday Jewelry Sale!
Tis the season to buy into the beautifully handmade resistance.
As ever, 5% the artist’s price from this series goes to Islamic Relief USA, a 501 (c) (3) non-profit humanitarian agency, whose work includes domestic and international development and relief projects.
*gotta put ASCII in there or I’ll have to face a nerd uprising
Wow, a whole week has rolled around without an intervening post – sorry team, that wasn’t mean to happen, but the Northwest Jewelry and Metals Symposium took over my focus late last week (from making works for Bilk Gallery in Canberra – more on that soon…) and the whole weekend, and what can I say, it was a CORKER! The best yet. If you’re ever in the area for the third weekend in October, you HAVE to head to it. And I can say this with unbiased hand to unbiased heart, as I’ve been off the organising committee a full two symposia now 😉
So, it’s Monday – gun day, part II.
I have a bunch of gun research that stretches back to 2012, which I’ve decided to start sharing, and lucky for y’all, this seems to be the obvious place. I’m not trying to trigger anyone, so if you’re not keen on following this line of thought, know that on Monday (Tuesday in some time-zones,) there will be posts generated as a result of my past and ongoing gun research.
The above images comes from a really interesting post that I first saw a couple of years ago, in 2015. I see it semi-regularly, as the post has been open in my web-browser since the day I came across it. I found it really arresting, but I didn’t know what to do with it. It’s so affecting, however, that I now count it amongst my always-open tabs (there are a random assortment of site alongside this, not just my mail client.) When I occasionally run across it, I’ll again scroll through to see what 33,636 guns looks like.
The author of this really unusual ‘article’, Matt Haughey writes; “According to the Centers for Disease Control, in 2013 all deaths due to firearms in the US amounted to 33,636 people.” He found a unique and very compelling way to visualise this, which proves really ‘sticky’ (you know what I mean?), at least to my brain.
In a not-so-happy coincidence, on the same day that many of us found out about the latest mass killing in the USA, I received the cheque for the sale of my Gun work to the University of Iowa Museum of Art.
So here’s a little about work, for which I began the research in December 2012, and finally finished the last part of about a year later, in early 2014.
The work Gun (a suite of three wearable pieces) is from the Escalation series. The works in Escalation are each made from domestic objects, taken out of their usual context and transformed into loaded jewels. Together the complete series reflects thousands of years of human history, the history we have of making weapons of war. The works (there is at least two wearable items for each ‘piece’) are loosely grouped into branches, based on the proximity to which the assailant would have to have to the victim (and vice versa) when used, which makes the whole Escalation project into a kind of family tree of tools for killing.
The Gun work is the Sword’s companion on one branch, as I see the gun as the successor to the sword in close combat situations. Rifles were the earliest effective firearms, so it was not a huge leap to use the Bushmaster XM15-E2S as my gun archetype. Sold as a hunting rifle in the USA, it is “a variant of the AR-15 first built by ArmaLite,”[i] “as an assault rifle for the United States armed forces.” (also known as the M16)[ii]. This Bushmaster is the weapon that was used for the Newtown massacre in 2012. If you see the whole series together, it becomes more obvious that this piece is the only one in my Escalation series that does not focus the wartime outcomes of a particular weapon. In making this exception, I wanted to make the point that these military grade weapons are available far too easily to the citizens of the US, and thus are in the homes and lives of ordinary people, which results in the premature deaths of this country’s most vulnerable citizens.
I made this piece from a strangely long and slightly medical-looking tray I bought new, at Daiso. I gave it 30 full-sized NATO shells (I chose there to depict the military round rather than the hunting round made by Remington), as 30 is the magazine’s capacity. I made 77 holes in the tray in the unfired bullet diameter, and strung the 77 cutouts on steel cable, which together add up to the 154 bullets expended within the school. The gun is made at 1:4 scale, making it very obvious to wear and more realistic than the miniature gun bling that is occasionally in fashion. The neckpiece with the 77 cutouts is 15m/40′ long, to represent, again at 1:4 scale (full scale being at least 60m/197′) the minimum distance that the shooter would have traversed inside of the school. I read the police report and literally plotted the shooter’s movements onto a floor plan of the school that I found online, to calculate the approximate length.
Finally, in all the pictures that accompany this series, I am wearing the works. They are photos I took of myself, by myself, and when these works are shown, they were a part of the display. It is important that the works, and the troubling histories that they represent, are on me. Like they are on all of humanity. And I for one am not at all happy about it.
[i] ‘AR-15’. Wikipedia, the Free Encyclopedia, 26 April 2013. http://en.wikipedia.org/w/index.php?title=AR-15&oldid=551188045.
I will be sticking around in Oakland to attend day one of a weekend of large scale enameling at KVO Industries on the 9th, which is super-exciting. Knowing that I have plans to make some more panel-based works in the next year or so for a show in the UK, I’m looking to up my large-format game, and since Judy Stone at the Center for Enamel Art – all-round champion of enamel and artists – suggested I do it, how could I refuse? Not that my moderate-panel game appears to be too shabby, as I recently won a prize for Wall Works (for the above) in the Enamelist Society Alchemy 4 Juried Exhibition!
I’ll also be giving a free public lecture next Wednesday night at California College of the Arts:
“From a tamper-proof fence to Body Politic – my enamel journey so far” 7:30pm, Nahl Hall, Oakland Campus, 5212 Broadway (map)
Looking forward to spending time in the heat after just finishing up my Aussie shenanigans of the past few weeks. Northern Summer, come at me!
Got a hankering to try out some experimental enameling? Join us to find out how straightforward and un-fussy enameling can be. We’re going to work on all types of steel – including that which we find on the street – to make beautifully enamelled jewels and objects, with the addition of porcelain enamel that will be applied in its liquid form.
I always look forward to these classes because of the way people surprise themselves when confronted with a medium that can be used in such diverse ways; behaving like watercolor, spray paint or even sand. Its versatility enables each maker to leverage their mastery in traditional materials – say even pencil and markers – and then make permanent the results by literally baking them on.
And hey, it’s in “beautiful, downtown Oakland, California!”
(Thanks to Roman Mars of the 99% Invisible podcast for being the indelible voice in my head for that line 😉 )
Do you like what we are doing with the I.M.A.G.I.N.E. Peace Now exhibition? If so, we could really use your help.
This national competition opens for voting today and is a chance for us to support the exhibition’s travel to Southern Indiana and Southern Kentucky and to include vital community programming aimed at the gun violence epidemic in this region.
(you can vote daily til May 12 – that’s the 13th of May in Aus!)
My work from the exhibition will (hopefully!) be heading along with the touring show, so if you are in Indiana or Kentucky and you want to see it, please vote 😉 And for those of you who will vote but won’t get to the US, here’s a video I made of the making process:
If you’re keen but haven’t yet made it out to see the Bellevue Arts Museum Biennial Metalmorphosis exhibition, the hourglass is telling me that there’s very few grains of sand left in the top bulb, so you’d better get along. The last day is Sunday the 5th of February. To tempt you – this is a short video of my work My House – Tanya Lippe’s Lunch Box in progress.
Yup, that’s me, breaking a saw blade. The abrupt ending (to the video) is a good analogue of how I felt every time I broke one, and it happened a lot that day…
Dunno about you, but I woke up with all the nerve endings firing in my gut on Wednesday morning, just before 3am. After nigh on an hour of bleary-eyed semi-consciousness, and after the hopes that sleep would take me back into her embrace had been dashed (such a temperamental lover) I caved in and checked my phone. My sisters in Australia had offered condolences that I didn’t need to swipe through to see, especially the one from Courtenay that ran thusly:
That was the entire message, but it told me that counting had finished and the map had been painted orange. Finally having the early predictions confirmed (I’d gone to bed early, both to avoid the anxiety of waiting and to read a good book – Mary Beard’s recent SPQR: A History of Ancient Rome – which turns out to be quite an apt companion for right now,) was definitely not going to help me sleep.
So I did some thinking. And a bit of googling. And at around 5:30am I placed an enamel order. I’ve never had much call for blue enamel before, so my stocks are paltry. Once this was done, around 6am, I went back to sleep reading about an ancient fallen empire.
My early morning thoughts ran something like this; I already have a body of work that is about putting encoded messages into the world, like this piece:
Body/Politic is a series of jewels where the medium is part of the message. The two-toned grids of pixels represent lines of binary code. Each piece literally spells out a message on the body of the wearer; readable to those who can interpret binary, the language that is the foundation of our digital culture. (These borrow from the visual language set up for the Drone works.) The messages reflect on the human condition, on how we are embodied, and what that means. The words/phrases that became works in the first series exhibited in March include your body is your vote (above), body, vote, unrepresented body, power and recently (just last week, for an upcoming show in May) I completed intensely embodied.
These are pieces are personal and political. They are words that reflect on my own physical body and its position in the world, and on the bodies of others who are in significantly more compromising situations, most particularly those bodies in combat areas, migrating bodies and those bodies who are suffering with illness.
Now before this gets too heavy, lets get back to the quality thinking time that my sleepless hours gifted me. So I have a trunk show booked for next week, and while I’ve been making the measured and politically/socially reflexive jewels like the work above over the last few years, none of those pieces are slated to be on the table next week. My plans for this week were to spend some time reorganising my stash of jewels to find some things that the good folks of Seattle haven’t seen before, and to make a few last pieces from the leftover parts of my La Geometrie laser-cuts to take along with me.
But then y’all had to go and elect an orange for a president.
I very purposely chose a blue top to wear yesterday, in protest (stay with me, this is relevant). And I’m in blue jeans today. Why? Because in my waking hours I was fixating on the fact that blue is the complimentary colour to orange on the colour wheel. Yep, this means it’s the opposite. So I’ve taken all this care dressing because I want to be the opposite of orange (yeah, despite my red hair.) But blue doesn’t just stand in opposition. It is the colour of the tears being shed for this and other depressing and alarming recent political events.
Blue is the colour of that soon-to-be pendant at the top of this (very long) blog post. It is the colour of the stockings on the women fighting to inform, enlighten and protect themselves, and it is the colour that HRC used to paint her campaign, and Bernie Sanders his. It’s the colour of the sky, of steel, and a bloody nice colour for an absolute shit-tonne of enamelled earrings.
And lets reiterate here, in RYB colour theory it’s the colour diametrically opposed to orange.
My search to find the opposite of an orange charity also began in the wee hours of Wednesday, and I’ve selected this one to give 10% of the purchase price of each pair of my brand new line of Resist earrings (pictured above) sold anywhere in the world. They’re going to retail for $30 US, and orders will be direct through me. (For anyone outside of Seattle, my postage price is being confirmed – please see below.)
About my blue charity:
Islamic Relief USA (IRUSA), based in Alexandria, Virginia, is a non-profit 501(c)(3) humanitarian agency and member of the Islamic Relief Worldwide group of organizations. IRUSA was founded in California in 1993. In addition to international relief and development initiatives, Islamic Relief USA also sponsors and funds domestic projects ranging from emergency disaster responses to assisting the American homeless population and supporting those who cannot afford basic healthcare.
Resist Earrings, $30 (US dollars) a pair.
stainless steel + blue enamel.
For your set you can mix and match or play it straight, or even buy an extra one so you can decide what kind of (blue) day you’re having. More colours (yup, all blue*) coming soon. How to get yours? See below or email me: email@example.com
If you’re in Seattle, please come along next week if you’re keen to check out my rainbow of blue earrings* or if you just need a shoulder. Together we can chat about resistance. It’s on at:
5619 University Way NE, Seattle, Washington 98105
Thursday, November 17 at 5:30 PM – 8:00 PM
(Facebook event – do them a favour for catering and let them know if you can 😉 )
Australia: you can count on Bilk and Bini Galleries getting a stack of these in the next week also, and for my sistren in Perth, I’ll see y’all in December and I’ll be sure to carry a few of these in my pocket.
USA: If you’re not in the PNW keep a look out, I’ll be posting the postage details ASAP
Canada– OK, BC: I’m heading up to Vancouver in a couple of weeks (no, not seeking asylum, though did I tell you the one about my grandparent who was born 12 miles south of Tisdale??) so let me know and I’ll bring them with me. The rest of you? Let me figure something out. We’re family!
Everywhere else: If you’re keen please get in contact and I’ll figure out your shipping rate. (I will be in Munich for the second week of March, and might even head to the UK for a hot minute, so if you can hold out that long…)
In the mean time, know that while my heart is blue, my gaze is steely.
*My Dad bought me my first car, back in the day. While we were looking around at listings he told me, “You can have any colour you like, so long as it’s blue.” I gratefully received a Corolla in midnight blue, despite preferring the burgundy…
Often jewelry is created to celebrate and mark milestones in life. As part of marking her milestone of turning 40, jewelry artist Tegan Wallace has invited a collection of artists to take a prototype or unfinished object from Tegan’s own work and breathe new life into them. These Bits and Bobs will become reflections of what Tegan has achieved so far while celebrating the metal community that had given her so much and continues to influence her own artistic growth.
As a part of being in this show Tegan gave me a piece of her work to finish up – incidentally, the pierced dome work that appears in the top third of the photograph above – that she began in her teens. She lovingly and ingeniously created this piece at her parents coffee table, and despite a lot of recent protest that it was practically done already, she didn’t consider it finished. It may not yet be, but for this show I’ve taken it and added my own parts, in steel and liquid enamel of course, and turned it into a piece of jewellery.
Come see it, and even say hello to me and Tegan at the opening, from 6 – 9pm this Friday. The show runs until November 28th.
Danaca Design Studio
5619 University Way NE
Seattle WA 98105